Tech Support: After Windows 7 SP1 Store to Ram (STR) sleep mode S3 does not work

After Windows 7 SP1 Store to Ram (STR) sleep mode S3 does not work

S3 STR sleep mode does not resume after applying Windows 7 SP1. 
It worked up to SP1.
The power supply starts normally, screen remains black, and the HD activity light does not flicker. 

Also, using the front panel power switch does not recover.  The only means of recovery, so far, is to remove the power plug for 10 seconds and then plug it back in.
Note: this is a sleep (S3) STR problem, not a hibernation problem and probably is a function of SATA Raid 0 configuration
System:
Motherboard: Gigabyte GA P55A UD4P.  Award BIOS version F14, date 9/16/2010
CPU: I5-750.  OS Windows 7 Professional +SP1
Hard drives: 2 WD Caviar Black 500MB SATA-2 drives in a Raid 0 configuration on Intel driver chip. 
Video card ATI Radeon HD 5570.  Updated driver:  1/25/11 Ver 8.821.0.0
Memory: 2x2GB Patriot 1600LL Series

Additional information:
Critical Event 41 – “The system has rebooted without cleanly shutting down first.
This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.” (because I removed and reapplied power).  This event was probably caused
by recycling power.
Powercfg /a - The following sleep states are available on this system: Standby (S3)
The following sleep states are not available on this system: Standby (S1)
            The system firmware does not support this standby state.
Standby (S2)
            The system firmware does not support this standby state.
Hibernate
            Hibernation has not been enabled.
Hybrid Sleep
 
Can anyone supply any information/help about the above bug?

Solutions to the Problem After Windows 7 SP1 Store to Ram (STR) sleep mode S3 does not work

Download SmartPCFixer to Fix It (Free)

Check Windows System Requirements

Microsoft Windows Requirements :

• 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
• 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
• 16 GB available hard disk space (32-bit) or 20 GB (64-bit)

You need to double-check your computer's hardware configuration against the following Microsoft requirements. If your PC hardware is not up to par, then make sure you update where necessary before continuing.

Another Safe way to Fix the Problem: After Windows 7 SP1 Store to Ram (STR) sleep mode S3 does not work:

How to Fix After Windows 7 SP1 Store to Ram (STR) sleep mode S3 does not work with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your system.  Open it, and it will perform a scan for your system. The junk files will be shown in the scan result.

2. After the scan is done, you can see the errors and problems which need to be fixed.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been removed.

Related: ,[Solution] Error Clean,Solution to Error: mozilla thunderbird not responding windows 7,Fast Solution to Error: 0x00405da8,Troubleshoot:Toolbar,Solution to Problem: Windows Media Player C00d1199 Windows 7,Solution to Error: Windows 7Function,Troubleshooting:Pc Code 9999 Error,Solution to Problem: Norton Svchost Exe Virus,[Anwsered] Error 2738
Read More: How to Resolve - After upgrade to IE8, I can't find my previous bookmarks which usually displayed after login?,After upgrading to Windows 7, download speed is slower [Anwsered],Troubleshooting:After upgrade to Win 7 from Win Vista... my monitor keeps blacking on and off.,Troubleshooting:after refreshing win8 how to get lost programs back? Error,[Solution] After reinstall, my windows seems to periodically freeze and unfreeze,32 bit printer drivers for Windows 7 64 bit OS,Activecell range 2 columns loop until last column,about pc battery power,Acrobat Reader downlode also automatically downloaded McAfee Security Plus...question about this below.,A runtime error has occurred. example: Line32 Do you wish to DeBug?